Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
Search in posts
Search in pages
Home » Hot melt adhesive film » PA polyamide double-sided hot melt adhesive film

PA polyamide double-sided hot melt adhesive film

USD 0.01
Lowest wholesale price (square meters)

Product Introduction

PA hot-melt adhesive film is a kind of thermoplastic double-sided hot-melt adhesive film. It has no adhesiveness at room temperature but has adhesiveness on both sides at high temperatures.

PA hot-melt adhesive film can use it for laminating two different materials. Its composition is co-polyamide, also known as nylon.It has no elasticity, transparent color, good dry cleaning resistance and washing resistance, and good molecular stability. It is more suitable for bonding textile fabrics, PI films, leather and rubber and other materials, and is widely used in clothing, shoes and hats, electronics and other fields.

Applicable bonding materials:

Applicable fields:


The PA hot melt adhesive film model is XJA110, it has a layer of backing paper (release paper), and it is a double-layer structure. When in use, you can iron it on the backing side to bond it with one of the materials. Please wait for it to cool before bonding with another material using pressing equipment.

Technical Data Sheet

Model XJA110
Ingredient CO-PA(Copolyamide)
With release paper YES
Color/shape Transparent/film
Melting range (℃) 120-130
Customizable thickness range (mm) 0.05-0.40
Customizable wide range(mm) 5-1500
Customizable length of each roll(meters) 5-500
Recommended use parameters Use temperature(℃) 130-160
Ironing pressure(MPa) 0.2
Ironing time(s) 10-30
Characteristic Excellent dry cleaning resistance, no elasticity

The thickness, width and length of each roll of PA hot melt adhesive film

We can customize the hot melt adhesive film; please refer to the technical parameter table above. For example, if you want to customize 48cm, 100cm width or 1cm, 2cm width, we can do it. 48cm and 50cm width products are trendy.

PA hot melt adhesive film specifications and product picture introduction

原图 (1)

XJA110 model PA hot-melt adhesive film

The XJA110 model PA hot-melt adhesive film comes with a layer of release paper, the thinnest thickness is 0.05mm, and the transparent color. Usually 100 meters per roll.

Common thickness: 0.05mm, 0.10mm,

Common width: 480mm, 1000mm, 1500mm

The common length of every roll:100 meters/roll

0.05mm thickness PA hot melt adhesive film
0.05mm thickness PA hot melt adhesive film
XJU120 TPU hot melt adhesive film

Breathable and soft mesh hot-melt adhesive web

If you think that PA hot melt adhesive film is more expensive and has no air permeability, then you might consider using a hot melt adhesive web. Hot melt adhesive web is a net-like hot melt adhesive product that looks similar to non-woven fabrics, has a soft hand feel, has good air permeability, and has a lower weight cost. Don’t worry about its environmental performance because it is similar to the hot melt adhesive film, and it is a hot melt adhesive product. We have passed the RoHS 2.0 test of SGS. You can click here to view different types of hot melt adhesive webs, or you can view only PA-type hot melt adhesive webs.

Our advantage


Source manufacturer, providing wholesale sales

We are a manufacturer of hot melt adhesive film & web in China, not a trader, you can get more favorable wholesale prices. We have multiple production equipments with a daily output of 90,000 meters.

Hot melt adhesive pellets

Made of 100% hot melt adhesive particles

The hot melt adhesive film & web we produce are made of 100% hot melt adhesive particles, and no other materials (such as talcum powder) are added to ensure better bonding performance and quality of the product.

RoHS 2.0

Has passed SGS's RoHS 2.0 test

The product has passed SGS's RoHS 2.0 test. It is safe and has no harm to the body. It can be exported to Europe, America and other countries.


PA hot melt adhesive film has no stickiness at room temperature and will only melt and stick at high temperatures. Therefore, you need to use an iron or other ironing equipment to use it.
How to use it: Use an iron to heat the backing side of the paper to melt the film and bond it to one of the fabrics. Please wait for it to cool and peel off the backing paper, and then use the iron again to iron on one side of the fabric to bond it with another fabric.
For more details, please refer to the article “How to Use Hot Melt Adhesive Film.”

We support non-standard customization, including width, thickness, length of each roll, other items, etc… Please refer to the technical table. Please contact us for details.

There are many reasons why the hot melt adhesive film is not firmly bonded, including the operation method, equipment condition and the selected hot melt adhesive film type. It is essential to choose different types of hot melt adhesive films for bonding different materials. Each type of hot melt adhesive film has its own good bonding materials, which is not determined by its price. For example, when you plan to bond two kinds of EVA foam, it is more recommended to use EVA-type hot melt adhesive film instead of TPU hot melt adhesive film. Even if TPU hot melt adhesive film is more expensive. I suggest you click here for more details.

We can provide free samples to facilitate your testing. But we cannot bear the international logistics costs. It is best if you have a DHL, FedEx or TXT account.

We have a variety of packaging solutions. Usually, the packaging used for the entire roll is: PE bubble film + kraft paper woven bag, and the inner diameter of the paper tube is 76mm. If you need carton packaging and adding marks, please contact us.

Store in a dry place at room temperature and avoid direct sunlight. Theoretically speaking, the product has no shelf life limit, but it is not recommended to leave it for more than 18 months when it is not in use.

We support T/T, PayPal, Alipay, WeChat and other payment methods and can provide FOB, EXW, CIF, DDU, and other quotation methods. The lead time varies according to the product model and quantity, usually between 3-30 days.

You can try to apply simple equipment, such as an iron or a flat ironing machine. If you need more professional and efficient equipment, I can recommend equipment manufacturers in China and provide technical support.

Yes, we can accept OEM, you can send us your requirements, and we will pack and label according to your requirements.

Hot melt adhesive films are divided into many types and models according to their composition. They are different in terms of elasticity, color, washing resistance and suitable fields. They are divided into TPU hot melt adhesive film, PES hot melt adhesive film, and EVA Hot melt adhesive film, PO hot melt adhesive film, and PA hot melt adhesive film, etc. Among them,  PA hot melt adhesive film is one of them. You can view more details by viewing an article on the classification of hot melt adhesive film types.

Yes, we can customize fusible webs and hemming webs, and we have relevant production experience, such as 45 cm width * 5 m length/roll and 43 cm width * 93 cm width/bag, etc. If you have a product sample like this, we can customize the finished product according to your sample and packaging design drawing. MOQ is 2000 units/model.

The PA hot melt adhesive film we produce is a thermoplastic hot-melt adhesive film. When it is exposed to high temperatures, it will repeatedly melt, not just once. Therefore, after you use it to make a product, you should not expose it to high temperatures again.

Get free samples

Contact us

Online Chat

    Add a header to begin generating the table of contents
    0.05mm thickness PA hot melt adhesive film

    PA polyamide double-sided hot melt adhesive film

    We are a manufacturer of hot melt adhesive film & web, we can provide you with more favorable wholesale prices 

    Get free samples

    Contact us

    Online Chat

    I only appear once, and I apologize if it disturbed your reading