PES Copolyester double-sided hot melt adhesive web interlining

PES hot melt adhesive web usage method is relatively simple. Just place it between the two layers of materials that need to be bonded, and then use an iron or other ironing equipment to iron on one of the materials so that the heat is transferred to the hot melt adhesive web in the middle and melted, that is Two materials can be bonded together. For a more detailed introduction, please read “How to Use Hot Melt Adhesive Web.”

We support non-standard customization, including width, weight, length of each roll and other items, etc., please refer to the technical table, please contact us for details.

There are many reasons why the hot melt adhesive web is not firmly bonded, including the operation method, equipment condition and the selected hot melt adhesive web type. Among them, it is particularly important to choose different types of hot melt adhesive webs for bonding different materials, because each type of hot melt adhesive web has its own good bonding materials, which is not determined by its price. of. For example, when you plan to bond two kinds of EVA foam, it is more recommended to use EVA type hot melt adhesive web instead of TPU hot melt adhesive web, even if the price of TPU hot-melt adhesive web is more expensive. I suggest you click here for more details.

We can provide free samples to facilitate your testing. But we cannot bear the international logistics costs. It is best if you have a DHL, FedEx or TXT account.

We have a variety of packaging solutions. Usually, the packaging used for the entire roll is: PE bubble film + kraft paper woven bag, and the inner diameter of the paper tube is 76mm. If you need carton packaging and adding marks, please contact us.

Store in a dry place at room temperature and avoid direct sunlight. Theoretically speaking, the product has no shelf life limit, but it is not recommended to leave it for more than 18 months when it is not in use.

We support T/T, PayPal, Alipay, WeChat and other payment methods, and can provide FOB, EXW, CIF, DDU and other methods of quotation. The lead time varies according to the product model and quantity, usually between 3-30 days.

You can try to apply simple equipment, such as an iron or a flat ironing machine. If you need more professional and efficient equipment, I can recommend equipment manufacturers in China and provide technical support.

Yes, we can accept OEM, you can send us your requirements, and we will pack and label according to your requirements.

Hot melt adhesive webs are divided into many types and models according to their composition. They are different in terms of elasticity, color, washing resistance and suitable fields. They are divided into TPU hot melt adhesive web, PES hot-melt adhesive web, EVA Hot melt adhesive web, PA hot-melt adhesive web, etc. Among them, PES hot melt adhesive web is one of them. You can view more details by viewing an article on the classification of hot melt adhesive film types.

Yes, we can customize fusible webs and hemming webs, and we have relevant production experience, such as 45 cm width * 5 m length/roll and 43 cm width * 93 cm width/bag, etc. If you have a product sample like this, we can customize the finished product according to your sample and packaging design drawing. MOQ is 2000 units/model.

The PES hot melt adhesive web we produce is a thermoplastic hot-melt adhesive web. When it is exposed to high temperatures, it will repeatedly melt, not just once. Therefore, after you use it to make a product, you should not expose it to high temperatures again.