Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
Search in posts
Search in pages

Email: [email protected]

    Add a header to begin generating the table of contents

    fusible web and adhesive sheet customization

    China Manufacturer - Wholesale Only

    iron on adhesive paper

    We are a Chinese production factory of double-sided fusible bonding web interfacing and iron on adhesive paper products. Including OEM, ODM, and other services. We can produce product size, product packaging, and printed content according to your requirements.

    We do not retail, only provide wholesale customization

    Different types of iron on adhesive

    We have different types of products; they are produced in different ways and ingredients. These are the types of products commonly used by craft enthusiasts. You can check the pictures below to determine the type of product you want to order. (Click on the image to jump to the introduction of the product ingredients)

    If you need the product in the picture, you can click here to view it.

    Technical Data Sheet

    Model XJO115 XJS130 XJU120 ZWA35 P-XWA116 ZGS-28 XWA116
    Ingredient PO(Polyolefin) PES(Co-polyester) TPU(Polyurethane) PA (copolyamide) PA (copolyamide) PA (copolyamide) PA (copolyamide)
    With release paper YES YES YES YES YES NO NO
    Color/shape Matte/film White translucent/film shape Transparent /film Transparent/net White/similar to non-woven fabric Transparent/net White/similar to non-woven fabric
    Melting range (℃) 100-115 115-125 95-110 115-130 115-130 115-130 115-130
    Thickness(mm) 0.05-0.60 0.05-0.60 0.025-0.60 - - - -
    Weight(gms) - - - 35 5-90 28 5-90
    Wide(mm) 5-1500 5-1500 5-1530 5-1120 5-1500 5-1120 5-3200
    Length of each roll(meters) 0.1-500 0.1-500 0.1-500 0.1-200 0.1-200 0.1-200 0.1-1000
    Recommended use parameters Use temperature(℃) 125-150 130-160 120-150 135-160 135-160 135-160 135-160
    Ironing pressure(MPa) 0.2 0.2 0.2 0.2 0.2 0.2 0.2
    Ironing time(s) 10-30 10-30 10-30 10-30 10-30 10-30 10-30
    Characteristic No elasticity, washable No elasticity, washable Elasticity; washable Washable, Dry cleanable Washable, Dry cleanable Washable, Dry cleanable Washable, Dry cleanable

    For products like XJO115 and XWA116, we also have different types of ingredients for you to choose from, and different types of products have different properties. You can view these by clicking on the Hot Melt Adhesive Web and Hot Melt Adhesive Film.

    Introduction to the difference

    Lower cost, good washing resistance, mainly used for clothing labels

    Excellent washability, good adhesion to polyester

    Elastic, soft, washable, good adhesion to all kinds of fabrics

    Good adhesion to all kinds of fabrics, dry cleaning, and washing resistance

    No release paper, excellent tack, washable

    Wide range of applications, high-cost performance, good adhesion to fabric and leather

    XWA116 with release paper for more convenient operation

    The difference between with release paper and without

    The difference between them is mainly in the method of use.

    The adhesive film without release paper is directly placed between the two layers of materials to be bonded when it is used, and it only needs to be hot pressed once. More convenient for continuous lamination operation.

    When the adhesive film with release paper is used, it is necessary to heat the release paper first, press the adhesive film to the material on the side to be bonded, then peel off the release paper, and then apply heat to the other side. The bonding material is hot-pressed, and it needs to be hot-pressed twice to complete the bonding. This makes the positioning and fitting operation more convenient.

    Usually, a film with a release liner will cost more.

    Size of iron-on adhesive

    We can customize the size of the product according to your needs, including thickness, width and length. As indicated in the above technical parameter table, the thickness of XJO115 model products can be customized from 0.05mm to 0.4mm, and the length of each roll can be from 0.1m to 500m. Generally speaking, in the field of manual appliques, the product size is 45cm (17.7 inches) wide*5 yards/roll and 43cm (17 inches) wide*93cm (1 yard)/piece. The more commonly used thickness and weight are: 0.05 mm (XJO115), 35gms (ZWA35) , 28gms(ZGS-28) and 23gms (P-XWA116)

    If you need to customize the product in the picture, you can click here to view it.

    Packaging of fusible web and adhesive sheet

    PE (LDPE) bag and PP bag packaging

    There are many types of the outer packaging, and the most commonly used is to use PE (LDPE) bags or PP bags for packaging, as shown in the figure below. Its advantage is that it is cheap. Compared with PP bags, PE (LDPE) bags are of higher quality. The size of the packaging bag is different. We can make the content and size of the packaging bag according to the length of the product and the design drawing.


    Bundled paper and heat shrinkable film packaging


    Bundled paper and heat shrinkable film packaging are usually used for long-length Iron-on adhesive products. Print on the wrapping paper and wrap the heat shrinkable film on the outer layer.

    Carton packaging

    Of course, we can also use carton packaging, such as the 808 models in the Pellon brand. But the packaging cost will be higher, and the minimum order quantity for printing and packaging will be more.


    Outer packaging


    We will use a carton for outer packaging. Usually, the number of products in a carton is 36 (45cm*5 yards) and 135 (43cm*1 yards), and the weight of each carton does not exceed 12 kg, and the carton is labeled with a label. Of course, we can also customize the size of the carton and the weight of each carton according to your requirements.

    Our advantage


    Source manufacturer, providing wholesale sales

    We are a manufacturer of hot melt adhesive film & web in China, not a trader, you can get more favorable wholesale prices. We have multiple production equipments with a daily output of 90,000 meters.

    Hot melt adhesive pellets

    Made of 100% hot melt adhesive particles

    The hot melt adhesive film & web we produce are made of 100% hot melt adhesive particles, and no other materials (such as talcum powder) are added to ensure better bonding performance and quality of the product.

    RoHS 2.0

    Has passed SGS's RoHS 2.0 test

    The product has passed SGS's RoHS 2.0 test. It is safe and has no harm to the body. It can be exported to Europe, America and other countries.


    We support non-standard customization, including: width, thickness, length of each roll and other items, etc., please refer to the technical table, please contact us for details.

    We can provide free samples to facilitate your testing. But we cannot bear the international logistics costs. It is best if you have a DHL, FedEx or TXT account.

    Store in a dry place at room temperature and avoid direct sunlight. Theoretically speaking, the product has no shelf life limit, but it is not recommended to leave it for more than 18 months when it is not in use.

    We support T/T, PayPal, Alipay, WeChat and other payment methods and can provide FOB, EXW, CIF, DDU, and other quotation methods. The lead time varies according to the product model and quantity, usually between 3-45 days.

    Yes, we can accept OEM, you can send us your requirements, and we will pack and label according to your requirements.

    Hot melt adhesive films are divided into many types and models according to their composition. They are different in terms of elasticity, color, washing resistance and suitable fields. They are divided into TPU hot melt adhesive film, PES hot melt adhesive film, and EVA Hot melt adhesive film, PO hot melt adhesive film, and PA hot melt adhesive film, etc. Among them, PO hot melt adhesive film is one of them. You can view more details by viewing an article on the classification of hot melt adhesive film types.

    The PO hot melt adhesive film we produce is a thermoplastic hot-melt adhesive film. When it is exposed to high temperatures, it will repeatedly melt, not just once. Therefore, after you use it to make a product, you should not expose it to high temperatures again.

    Get free samples

    Contact us

    Online Chat


    Fusible bonding web manufacturer iron-on adhesive -KETAEBO

    We are a manufacturer of hot melt adhesive film & web, we can provide you with more favorable wholesale prices 

    Get free samples

    Contact us

    Online Chat

    I only appear once, and I apologize if it disturbed your reading